Introduction to Well type quenching furnace, introduction to Forging furnace advantages and characteristics

Well type quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Well type quenching furnace

Well type quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Well type quenching furnace，The price is relatively low.。

Well type quenching furnace

2、Structural advantages of Well type quenching furnace

The Well type quenching furnace has the following structure

1. Radiation chamber

The heat load of the main place for Well type quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Radiation chamber

The heat load of the main place for Well type quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Well type quenching furnace

3、On-site real shot of Well type quenching furnace

Haide Well type quenching furnace manufacturing factory。

Well type quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Well type quenching furnace characteristics

The Well type quenching furnace features are as follows:

1. Efficient heating

The Well type quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to maintain

The structural design of the Well type quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Well type quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Stable and reliable

The Well type quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Well type quenching furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Well type quenching furnace

5、Introduction of advantages of Well type quenching furnace

The advantages of Well type quenching furnace are as follows:

1. Extend the service life of equipment

The Well type quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Wide application range

The Well type quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Well type quenching furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Rapid temperature rise

The Well type quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Efficient combustion

The Well type quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Well type quenching furnace

6、Working principle of Well type quenching furnace

Well type quenching furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，the main features are Easy to maintain, Stable and reliable, Strong adaptability, Easy to control and Strong adaptability，is a kind of Well type quenching furnace manufactured by One-combustion energy saving。

Well type quenching furnace

Well type quenching furnaceis a common Well type quenching furnace，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。