Introduction to Well type bright furnace, advantages, characteristics and principles of forging furnace

Well type bright furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Well type bright furnace:

1、Brief introduction of Well type bright furnace

Well type bright furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Well type bright furnace

2、Well type bright furnace application

Well type bright furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Well type bright furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Well type bright furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Well type bright furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Well type bright furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Improve production efficiency

The Well type bright furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Well type bright furnace

3、Well type bright furnace function

Well type bright furnaceit has the functions of quench, heat treatment, temper, anneal and normalizing，Mainly used forImprove production efficiency,Metal forging heating,Energy conservation and environmental protection,Metal tempering andMetal melting and casting。

Well type bright furnace

4、Introduction of advantages of Well type bright furnace

The advantages of Well type bright furnace are as follows:

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Uniform heating

The Well type bright furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Multiple fuel options

Although the Well type bright furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Wide application range

The Well type bright furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Well type bright furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Well type bright furnace

5、Well type bright furnace explanation video

Speak directly with facts on the spot。

Well type bright furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

6、Well type bright furnace video

The following is the live video of Well type bright furnace designed and produced by One-combustion energy saving for users, from which we can see the Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment. of One-combustion energy savingProduction and processing的Well type bright furnace.。

Well type bright furnace

As you can see from the live video.，One-combustion energy saving the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Well type bright furnaceUsing regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is mainly composed of ventilation system, furnace chamber, furnace chamber, Radiation chamber and combustor，the product looks beautiful.。