What is a Industrial well furnace? Introduction to the advantages and characteristics of heating furnace functions

Industrial well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，super quality and competitive price。The following is to introduce the Industrial well furnace:

1、Brief introduction of Industrial well furnace

Industrial well furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has been widely used in Household necessities, shipping, building materials, automobile, heat treatment and other industries，Widely used in Metal melting and casting, Metal forging heating, Improve production efficiency, Metal heat treatment and Energy conservation and environmental protection，Easy to control,Strong adaptability,energy saving and environmental protection,energy saving and environmental protection,energy-efficient，is based on One-combustion energy saving is a kind of Industrial well furnace manufactured by One-combustion energy saving。

Industrial well furnace

2、Industrial well furnace structure

The Industrial well furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Industrial well furnace

3、Industrial well furnace principle

Industrial well furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has been widely used in pharmacy, chemical industry, petroleum, metallurgy, shipping and other industries，is an advanced Industrial well furnace developed by our company in combination with the actual situation of the industry。

Industrial well furnace

4、Industrial well furnace characteristics

The Industrial well furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Industrial well furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Efficient heating

The Industrial well furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

3. Strong adaptability

The Industrial well furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Easy to maintain

The structural design of the Industrial well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Industrial well furnace

5、Industrial well furnace use

The purpose of Industrial well furnace is introduced as follows:

1. Metal forging heating

The Industrial well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Industrial well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Industrial well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Industrial well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Industrial well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Industrial well furnace

Industrial well furnaceThe structural design is more advanced and reasonable.，it has the structure of ventilation system, convection chamber, furnace chamber, Radiation chamber and recovery of waste heat，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。