Introduction to SCR catalytic oxidation denitrification, how much is the price of the SCR denitration?

SCR catalytic oxidation denitrificationis an efficient, stable and environment-friendly flue gas denitrification technology.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR catalytic oxidation denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR catalytic oxidation denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR catalytic oxidation denitrification technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR catalytic oxidation denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR catalytic oxidation denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The SCR catalytic oxidation denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR catalytic oxidation denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.，widely used inmetallurgy,building materials,coal-fired power station,Gas power plant,coal-fired power station and other industries，Efficient denitration,Stable operation,Strong adaptability,Strong adaptability,Environmental protection and pollution-free，It is a product series that integrates Improve product quality, Meet the requirements of environmental protection, environmental protection, Flue gas denitrification and Promote sustainable development。

1、Brief introduction of SCR catalytic oxidation denitrification

SCR catalytic oxidation denitrificationdelective catalytic reduction technology is an efficient flue gas denitrification technology.，the product looks atmospheric.，Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，is a SCR catalytic oxidation denitrification，it is an ideal choice for customers to buy SCR catalytic oxidation denitrification。

SCR catalytic oxidation denitrification

2、Introduction of SCR catalytic oxidation denitrification characteristics

SCR catalytic oxidation denitrification has the following characteristics

1. High denitration efficiency

The denitration efficiency of SCR catalytic oxidation denitrification technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

2. Strong adaptability

SCR catalytic oxidation denitrification technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

3. Small secondary pollution

The by-products produced in the SCR catalytic oxidation denitrification opening process are nitrogen and water vapor, and there is no secondary pollution problem.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

SCR catalytic oxidation denitrification

3、SCR catalytic oxidation denitrification application

SCR catalytic oxidation denitrificationIt can be used for Improve product quality, Meet the requirements of environmental protection, Promote sustainable development, Flue gas denitrification, environmental protection, Meet the requirements of environmental protection and so on，is a kind of high quality and low price SCR catalytic oxidation denitrification。

SCR catalytic oxidation denitrification

4、SCR catalytic oxidation denitrification structure composition

The SCR catalytic oxidation denitrification structure is introduced as follows:

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. control system

The whole SCR catalytic oxidation denitrification is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

3. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

4. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

5. Reactor

It is the core component of SCR catalytic oxidation denitrification technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

SCR catalytic oxidation denitrification

5、Introduction of advantages of SCR catalytic oxidation denitrification

SCR catalytic oxidation denitrifications have the following advantages.

1. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the SCR catalytic oxidation denitrification technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR catalytic oxidation denitrification technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

2. Mature and stable technology

SCR catalytic oxidation denitrification technology has been developed and applied for many years, and the technology is mature and stable. The SCR catalytic oxidation denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR catalytic oxidation denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR catalytic oxidation denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR catalytic oxidation denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

4. Intelligent control and convenience of operation

The SCR catalytic oxidation denitrification has gradually realized intelligent control. By integrating advanced control system and sensor technology, the SCR catalytic oxidation denitrification can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

5. Environmental friendliness

The by-products produced by SCR catalytic oxidation denitrification technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR catalytic oxidation denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

SCR catalytic oxidation denitrification

SCR catalytic oxidation denitrificationWidely used inenvironmental protection,Flue gas denitrification,Improve product quality,Promote sustainable development,Promote sustainable development and so on，it is widely used iniron and steel plant,metallurgy,building materials,cement plant,Gas power plant and other industries，the product looks beautiful.。