Introduction to Denitrification system for forging heating furnace and SCR flue gas denitrification structure principle

Denitrification system for forging heating furnacethe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，it has the characteristics of Less secondary pollution, Stable operation, High denitration efficiency, Stable operation and Promote sustainable development，customizable。

1、Brief introduction of Denitrification system for forging heating furnace

Denitrification system for forging heating furnaceis an efficient, stable and environment-friendly flue gas denitrification technology.，the advantage is Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification system for forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification system for forging heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification system for forging heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification system for forging heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification system for forging heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，has been favored by more and more customers.。

Denitrification system for forging heating furnace

2、Denitrification system for forging heating furnace video detail

On-site aerial photography of Denitrification system for forging heating furnace。

Denitrification system for forging heating furnace

As you can see from the live video.，One-combustion energy saving it has the structure of Catalyst reactor, Catalyst supply system, Temperature control and monitoring system, Flue gas mixing and distribution system and control system，This Denitrification system for forging heating furnaceThe structure is novel, special, advanced, reasonable and scientific.。

3、Denitrification system for forging heating furnace use

Denitrification system for forging heating furnaceIt is mostly used in Flue gas denitrification, Flue gas denitrification, environmental protection, Meet the requirements of environmental protection, Improve product quality, Promote sustainable development and so on，it can be used in metallurgy, Gas power plant, iron and steel plant, cement plant, building materials and other industries，The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Denitrification system for forging heating furnace technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification system for forging heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Technology has been developed and applied for many years, and it is mature and stable. The Denitrification system for forging heating furnace has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Denitrification system for forging heating furnace technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Denitrification system for forging heating furnace technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Denitrification system for forging heating furnace technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，it has the functions of Improve energy efficiency, environmental protection, Improve working conditions, environmental protection and Improve energy efficiency，it is an ideal choice for customers to buy Denitrification system for forging heating furnace。

Denitrification system for forging heating furnace

4、Denitrification system for forging heating furnace function

Denitrification system for forging heating furnacemultifunctional, with functions such as Promote sustainable development, Improve working conditions, environmental protection, Improve working conditions and Improve energy efficiency，The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification system for forging heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification system for forging heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification system for forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Denitrification system for forging heating furnace technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Denitrification system for forging heating furnace technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Denitrification system for forging heating furnace technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Denitrification system for forging heating furnace can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.，at the start of the operation,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。

Denitrification system for forging heating furnace

5、Denitrification system for forging heating furnace structure composition

The Denitrification system for forging heating furnace has the following structure

1. Flue gas mixing and distribution

The mixed reducing agent and flue gas are fully mixed in the mixing tube and evenly distributed to the catalyst reactor through the distribution system.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. Reactor

It is the core component of Denitrification system for forging heating furnace technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

4. control system

The whole Denitrification system for forging heating furnace is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

5. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

Denitrification system for forging heating furnace

6、Denitrification system for forging heating furnace application

Denitrification system for forging heating furnaceIt has the functions of Flue gas denitrification, environmental protection, Improve product quality, Meet the requirements of environmental protection and Promote sustainable development，the product looks beautiful.。

Denitrification system for forging heating furnace

Denitrification system for forging heating furnacethat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the product looks atmospheric.。