Brief introduction and functional advantages of Segmented annealing furnace

Segmented annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in light industry, material, electron, heat treatment and Household necessities，multifunctional, with functions such as quench, hardening and tempering, normalizing, anneal and Forging heating，It can be used for Energy conservation and environmental protection, Improve production efficiency, Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency and so on，it mainly includes ventilation system, convection chamber, combustor, furnace chamber and furnace chamber，Segmented annealing furnaceSimple structure and reliable operation.。The following is to introduce the Segmented annealing furnace:

1、Brief introduction of Segmented annealing furnace

Segmented annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，has been favored by more and more customers.。

Segmented annealing furnace

2、Segmented annealing furnace characteristics

The Segmented annealing furnace features are as follows:

1. Efficient heating

The Segmented annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Strong adaptability

The Segmented annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Efficient heating

The Segmented annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Segmented annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Easy to maintain

The structural design of the Segmented annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Segmented annealing furnace

3、Advantages of Segmented annealing furnace principle

Segmented annealing furnacethe principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，features include Easy to maintain, Strong adaptability, Easy to control, energy-efficient and Stable and reliable，It is a forging heating device using gas as fuel.。

Segmented annealing furnace

4、Segmented annealing furnace advantage

The advantages of Segmented annealing furnace are as follows:

1. Uniform heating

The Segmented annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Extend the service life of equipment

The Segmented annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Improve product quality

Because the Segmented annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Intelligent control

The Segmented annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Extend the service life of equipment

The Segmented annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Segmented annealing furnace

5、Segmented annealing furnace structure

The Segmented annealing furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Segmented annealing furnace

6、Segmented annealing furnace performance advantage

Segmented annealing furnaces have the following advantages.

1. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

2. Wide application range

The Segmented annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Uniform heating

The Segmented annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Segmented annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Efficient combustion

The Segmented annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Segmented annealing furnace

Segmented annealing furnacewidely used insurface treatment,metallurgy,automobile,petroleum,Machinery manufacturing and other industries，Easy to maintain,Easy to control,energy-efficient,Stable and reliable,energy saving and environmental protection，it is widely used inbuilding materials,building materials,automobile,light industry,aerospace and other industries。