Brief introduction and functional advantages of Trolley mold preheating furnace

Trolley mold preheating furnaceIt is a forging heating device using gas as fuel.，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is designed by One-combustion energy saving with advanced technology。The following is to introduce the Trolley mold preheating furnace:

1、Brief introduction of Trolley mold preheating furnace

Trolley mold preheating furnaceIt is a forging heating device using gas as fuel.。

Trolley mold preheating furnace

2、Introduction of Trolley mold preheating furnace characteristics

Trolley mold preheating furnace has the following characteristics

1. Stable and reliable

The Trolley mold preheating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Trolley mold preheating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Trolley mold preheating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

The combustion system and ventilation system of the Trolley mold preheating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Strong adaptability

The Trolley mold preheating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Trolley mold preheating furnace

3、Trolley mold preheating furnace video live broadcast

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Trolley mold preheating furnace production process and production site, and gain favorable comments and recognition from customers.。

Trolley mold preheating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it is widely used inpharmacy,Machinery manufacturing,automobile,surface treatment,light industry and other industries。

4、Trolley mold preheating furnace application

Trolley mold preheating furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley mold preheating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Trolley mold preheating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Trolley mold preheating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Trolley mold preheating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Trolley mold preheating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Trolley mold preheating furnace

5、Trolley mold preheating furnace price

The Trolley mold preheating furnace price is introduced as follows:

1. Manufacturer scale

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

2. regional difference

One-combustion energy savingJinan, the transportation is convenient, and the corresponding cost of transporting Trolley mold preheating furnace is low, which reduces the cost of selling Trolley mold preheating furnace by manufacturers, and the price will also decrease.

3. marketing channel

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

4. market supply and demand

Market supply and demand is the inevitable law of market development, with more market supply, less demand and lower product prices; The market supply is small, and people's demand is large. "Things are scarce and expensive", the product price will increase accordingly, and the price of One-combustion energy saving Trolley mold preheating furnace will also conform to this market law.

5. Configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Trolley mold preheating furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Trolley mold preheating furnace is reasonable for products with the same configuration.

Trolley mold preheating furnace

6、company introduction

One-combustion energy saving has many years of experience in Trolley mold preheating furnace production, and is a professional Trolley mold preheating furnace manufacturer. With favorable Trolley mold preheating furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Trolley mold preheating furnace manufacturer in Shandong(Province).。

One-combustion energy saving

Trolley mold preheating furnacethe main structure includes combustor, ventilation system, furnace chamber, convection chamber and recovery of waste heat，Trolley mold preheating furnaceThe overall structural design is relatively simple and compact.，Commonly used inMetal forging heating,Metal forging heating,Improve production efficiency,Metal melting and casting,Metal heat treatment and so on，multifunctional, with functions such as normalizing, quench, temper, anneal and Casting heating。