What is a Automatic feeding and discharging heating furnace? heating furnace specifications, models, and parameters

Automatic feeding and discharging heating furnaceIt is a forging heating device using gas as fuel.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，The price is low and affordable，modern technology。

1、Brief introduction of Automatic feeding and discharging heating furnace

Automatic feeding and discharging heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the main features are energy saving and environmental protection, Stable and reliable, Easy to maintain, Easy to control and Strong adaptability，widely used in chemical industry, aerospace, petroleum, light industry, pharmacy and other fields，it is an ideal choice for customers to buy Automatic feeding and discharging heating furnace。

Automatic feeding and discharging heating furnace

2、Introduction of Automatic feeding and discharging heating furnace characteristics

Automatic feeding and discharging heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Automatic feeding and discharging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The Automatic feeding and discharging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The Automatic feeding and discharging heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Easy to maintain

The structural design of the Automatic feeding and discharging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Automatic feeding and discharging heating furnace

3、Automatic feeding and discharging heating furnace principle

Automatic feeding and discharging heating furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the product looks atmospheric.，it has the functions of Forging heating, normalizing, hardening and tempering, temper and heat treatment，support customization。

Automatic feeding and discharging heating furnace

4、Automatic feeding and discharging heating furnace function

Automatic feeding and discharging heating furnacemultifunctional, with functions such as temper, hardening and tempering, Casting heating, Forging heating and normalizing，It is a product series that integrates Metal tempering, Metal heat treatment, Metal forging heating, Metal melting and casting and Energy conservation and environmental protection，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is designed by One-combustion energy saving with advanced technology。

Automatic feeding and discharging heating furnace

5、Automatic feeding and discharging heating furnace real beat

High-definition pictures at a glance, beautifully designed atmosphere, stylish, extraordinary temperament, for your visit.。

Automatic feeding and discharging heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、company introduction

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Automatic feeding and discharging heating furnace with Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Automatic feeding and discharging heating furnaceit is mainly composed of ventilation system, ventilation system, recovery of waste heat, Radiation chamber and ventilation system，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。