Introduction to Track type heating furnace and heating furnace working principle

Track type heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.。The following is to introduce the Track type heating furnace:

1、Brief introduction of Track type heating furnace

Track type heating furnaceIt is a forging heating device using gas as fuel.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，Widely used inMetal forging heating,Metal melting and casting,Metal tempering,Metal heat treatment,Energy conservation and environmental protection and so on，is an advanced Track type heating furnace developed by our company in combination with the actual situation of the industry。

Track type heating furnace

2、Video analysis of Track type heating furnace

The following is the live video of Track type heating furnace designed and produced by One-combustion energy saving for users, from which we can see the Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes. of One-combustion energy savingproduce的Track type heating furnace.。

Track type heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

3、Track type heating furnace HD picture real shot

High-definition pictures for various Track type heating furnace, panoramic display,the product looks atmospheric., reliable in quality and trustworthy.。

Track type heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Track type heating furnace structure composition

The Track type heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Track type heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Track type heating furnace

5、Track type heating furnace use

The purpose of Track type heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Track type heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Track type heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Track type heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Track type heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Track type heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Track type heating furnace

6、How to choose the right product manufacturer?

Choosing a suitable Track type heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Track type heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Track type heating furnaceat runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the functions of anneal, Casting heating, Forging heating, quench and heat treatment，It is mostly used in Metal tempering, Metal melting and casting, Metal heat treatment, Energy conservation and environmental protection, Improve production efficiency, Metal forging heating and so on。