What is a Heat exchange heating furnace? How much is the price of the heating furnace?

Heat exchange heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks beautiful.，is a Heat exchange heating furnace，was developed and designed by One-combustion energy saving。The following is to introduce the Heat exchange heating furnace:

1、Brief introduction of Heat exchange heating furnace

Heat exchange heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the functions of Forging heating, hardening and tempering, temper, heat treatment and anneal。

Heat exchange heating furnace

2、Advantages of Heat exchange heating furnace principle

Heat exchange heating furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，The overall structural design is simple, diverse and beautiful.，it has the structure of recovery of waste heat, ventilation system, ventilation system, Radiation chamber and furnace chamber，customizable。

Heat exchange heating furnace

3、Heat exchange heating furnace field real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Heat exchange heating furnace production process and production site, and gain favorable comments and recognition from customers.。

Heat exchange heating furnace

As you can see from the live video.，One-combustion energy saving it has the characteristics of Easy to control, Stable and reliable, energy saving and environmental protection, Easy to control and Stable and reliable。

4、Introduction of Heat exchange heating furnace characteristics

Heat exchange heating furnace has the following characteristics

1. Easy to control

The combustion system and ventilation system of the Heat exchange heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Heat exchange heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Stable and reliable

The Heat exchange heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Heat exchange heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Heat exchange heating furnace

5、How much is the Heat exchange heating furnace?

The Heat exchange heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan has convenient transportation, which provides a good convenience for the transportation of Heat exchange heating furnace.

3. Configuration level

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Heat exchange heating furnace are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Heat exchange heating furnace, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

4. quality factor

As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.

5. Model type

Because there are many specifications and models of Heat exchange heating furnace, the quotations of Heat exchange heating furnace with different specifications and models are different.

Heat exchange heating furnace

6、One-combustion energy saving workshop picture real shot

The finished products of the Heat exchange heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Heat exchange heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Heat exchange heating furnaceThe overall structural design is simple and novel.，Structure consists of combustor, furnace chamber, ventilation system, Radiation chamber, convection chamber and so on，It is a forging heating device using gas as fuel.，is a common Heat exchange heating furnace。