What is a Split type well type heat treatment furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Split type well type heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，has been favored by more and more customers.。The following is to introduce the Split type well type heat treatment furnace:

1、Brief introduction of Split type well type heat treatment furnace

Split type well type heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it can be used in chemical industry, petroleum, surface treatment, Household necessities, building materials and other industries，Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，It has the functions of Energy conservation and environmental protection, Metal heat treatment, Metal melting and casting, Metal heat treatment and Metal tempering，has been favored by more and more customers.。

Split type well type heat treatment furnace

2、Split type well type heat treatment furnace HD real picture

Overview of high-definition pictures,the product looks beautiful., different specifications and models。

Split type well type heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Split type well type heat treatment furnace function

Split type well type heat treatment furnaceit has the functions of Forging heating, normalizing, hardening and tempering, quench and heat treatment，the main structure includes ventilation system, Radiation chamber, ventilation system, furnace chamber, furnace chamber and so on，the main features are Stable and reliable, Strong adaptability, Easy to maintain, energy-efficient and Strong adaptability，The overall structural design is relatively simple and compact.，generally, it is composed of Radiation chamber, convection chamber, ventilation system, combustor, ventilation system and other major components，it is widely used in light industry, shipping, war industry, electron, machinery and other industries。

Split type well type heat treatment furnace

4、Split type well type heat treatment furnace principle

Split type well type heat treatment furnacethe principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is a forging heating device using gas as fuel.，It is a product series that integrates Energy conservation and environmental protection, Improve production efficiency, Metal forging heating, Metal heat treatment and Metal tempering。

Split type well type heat treatment furnace

5、Split type well type heat treatment furnace use

The purpose of Split type well type heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Split type well type heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Split type well type heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type well type heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Split type well type heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Split type well type heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Split type well type heat treatment furnace

Split type well type heat treatment furnaceThe metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it is widely used in pharmacy, war industry, machinery, material and chemical industry，at the start of the operation,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。