Introduction to Manganese steel heating furnace, introduction to forging furnace function advantages and characteristics

Manganese steel heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，energy saving and environmental protection,Stable and reliable,Strong adaptability,energy-efficient,Easy to control，the product looks beautiful.，modern technology。

1、Brief introduction of Manganese steel heating furnace

Manganese steel heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，was developed and designed by One-combustion energy saving。

Manganese steel heating furnace

2、Manganese steel heating furnace HD real picture

The Manganese steel heating furnace has a beautiful appearance and atmosphere for our customers' reference.。

Manganese steel heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Manganese steel heating furnace structure

The Manganese steel heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Manganese steel heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Manganese steel heating furnace

4、Manganese steel heating furnace performance advantage

The advantages of Manganese steel heating furnace are as follows:

1. easy to operate

The operation interface of the Manganese steel heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Improve product quality

Because the Manganese steel heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Multiple fuel options

Although the Manganese steel heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Extend the service life of equipment

The Manganese steel heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Manganese steel heating furnace

5、Manganese steel heating furnace use

The purpose of Manganese steel heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Manganese steel heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Manganese steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Manganese steel heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Manganese steel heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Manganese steel heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Manganese steel heating furnace

Manganese steel heating furnaceit has the characteristics of Easy to maintain, energy saving and environmental protection, Stable and reliable, Strong adaptability and energy-efficient，widely used in Machinery manufacturing, surface treatment, light industry, material, war industry and other fields。