Introduction to pusher-type, forging furnace specifications, model parameters

pusher-typeIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of temper, anneal, Casting heating, quench and heat treatment，Simple structure and advanced technology.，it is mainly composed of ventilation system, convection chamber, combustor, furnace chamber and recovery of waste heat，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，it is an ideal choice for customers to buy pusher-type。The following is to introduce the pusher-type:

1、Brief introduction of pusher-type

pusher-typeIt is a forging heating device using gas as fuel.，is a common pusher-type，widely used in electron, material, petroleum, automobile, light industry and other fields，Cheap and high quality。

pusher-type

2、pusher-type working site

You can buy pusher-type according to your needs and show you product videos.。

pusher-type

As you can see from the live video.，One-combustion energy saving at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

3、pusher-type function

pusher-typemultifunctional, with functions such as normalizing, hardening and tempering, Forging heating, temper and Forging heating，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，features include energy saving and environmental protection, Stable and reliable, Easy to maintain, energy-efficient and energy saving and environmental protection，customizable。

pusher-type

4、pusher-type use

The purpose of pusher-type is introduced as follows:

1. Energy conservation and environmental protection

The pusher-type uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, pusher-types can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal forging heating

The pusher-type can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Improve production efficiency

The pusher-type has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the pusher-type can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

pusher-type

5、Introduction of pusher-type characteristics

pusher-type has the following characteristics

1. Easy to maintain

The structural design of the pusher-type is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Strong adaptability

The pusher-type is suitable for forging and heating of various metal materials and has a wide range of applications.

3. Stable and reliable

The pusher-type has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Strong adaptability

The pusher-type can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

pusher-type

6、Company selection

Choosing a suitable pusher-type manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase pusher-type products that meet the demand and have good cost performance.。

One-combustion energy saving

pusher-typethe main features are Strong adaptability, Easy to maintain, energy saving and environmental protection, Strong adaptability and Easy to control，Simple structure and reliable operation.，it is usually composed of Radiation chamber, ventilation system, ventilation system, convection chamber and recovery of waste heat，the product looks beautiful.。