Introduction to High temperature annealing furnace, heating furnace specifications, model parameters

High temperature annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，at runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of High temperature annealing furnace

High temperature annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Widely used inMetal heat treatment,Metal tempering,Metal forging heating,Improve production efficiency,Metal melting and casting and so on，the main structure includes recovery of waste heat, combustor, convection chamber, recovery of waste heat and combustor，High temperature annealing furnaceThe structure is novel, special, advanced, reasonable and scientific.，it has the functions of normalizing, temper, heat treatment, Forging heating and quench，the product looks atmospheric.。

High temperature annealing furnace

2、High temperature annealing furnace HD picture real shot

The details of the High temperature annealing furnace are displayed in many directions, and the High temperature annealing furnace is beautiful and cost-effective.。

High temperature annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Advantages of High temperature annealing furnace principle

High temperature annealing furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

High temperature annealing furnace

4、High temperature annealing furnace advantage

The advantages of High temperature annealing furnace are as follows:

1. Improve product quality

Because the High temperature annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Extend the service life of equipment

The High temperature annealing furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Intelligent control

The High temperature annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Efficient combustion

The High temperature annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

High temperature annealing furnace

5、High temperature annealing furnace characteristics

The High temperature annealing furnace features are as follows:

1. Strong adaptability

The High temperature annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some High temperature annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The High temperature annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the High temperature annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The High temperature annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

High temperature annealing furnace

6、Brief introduction of High temperature annealing furnace

High temperature annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the main features are energy-efficient, Strong adaptability, energy-efficient, Stable and reliable and Easy to control，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a common High temperature annealing furnace，is based on One-combustion energy saving is an advanced High temperature annealing furnace developed by our company in combination with the actual situation of the industry。

High temperature annealing furnace

High temperature annealing furnaceAdopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，The structural design is simple, novel and special.，Structure consists of ventilation system, furnace chamber, Radiation chamber, ventilation system, convection chamber and so on。