Introduction to Thermal insulation annealing industrial furnace, introduction to heating furnace function advantages and characteristics

Thermal insulation annealing industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a Thermal insulation annealing industrial furnace，Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。

1、Brief introduction of Thermal insulation annealing industrial furnace

Thermal insulation annealing industrial furnaceIt is a forging heating device using gas as fuel.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a popular Thermal insulation annealing industrial furnace，It has a wide range of uses, and is often used inMetal melting and casting,Energy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal tempering and so on，support customization。

Thermal insulation annealing industrial furnace

2、Thermal insulation annealing industrial furnace characteristics

The Thermal insulation annealing industrial furnace features are as follows:

1. Strong adaptability

The Thermal insulation annealing industrial furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Efficient heating

The Thermal insulation annealing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Thermal insulation annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Thermal insulation annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Thermal insulation annealing industrial furnace

3、Thermal insulation annealing industrial furnace HD real shot

On-site aerial photography of Thermal insulation annealing industrial furnace。

Thermal insulation annealing industrial furnace

As you can see from the live video.，One-combustion energy saving at the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

4、Working principle of Thermal insulation annealing industrial furnace

Thermal insulation annealing industrial furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is based on One-combustion energy saving is an advanced Thermal insulation annealing industrial furnace developed by our company in combination with the actual situation of the industry。

Thermal insulation annealing industrial furnace

5、Thermal insulation annealing industrial furnace price concessions

The Thermal insulation annealing industrial furnace price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Thermal insulation annealing industrial furnace price and service can meet the actual needs of customers.

2. Different regions

The price of Thermal insulation annealing industrial furnace in Jinan is much lower than that in other regions, and One-combustion energy saving is a large-scale manufacturer integrating production and sales not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the Thermal insulation annealing industrial furnace price positioning more reasonable, low-cost and economical.

3. Manufacturer scale

The nature of the manufacturer can also greatly affect the price of the Thermal insulation annealing industrial furnace. General manufacturers are divided into direct sellers, agents and middlemen. If they are direct selling manufacturers, there are not too many intermediate links, and their sales prices are low.

4. Manufacturer's sales model

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

5. product quality

The quality of products provided by different manufacturers is different, so their prices will be different. Generally, large manufacturers provide products with higher quality, and the cost of technology and materials is more, so the price is relatively high. However, such products have better use effect and can bring longer-term benefits to customers.

Thermal insulation annealing industrial furnace

6、One-combustion energy saving introduced

One-combustion energy saving, as one of the professional and powerful Thermal insulation annealing industrial furnace manufacturers in Jinan, Shandong province, produces Thermal insulation annealing industrial furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Thermal insulation annealing industrial furnaceThe overall structural design is relatively simple，the main structure includes convection chamber, recovery of waste heat, ventilation system, convection chamber, Radiation chamber and so on，it has the functions of temper, anneal, hardening and tempering, anneal and normalizing。