Introduction to Rapid quenching heating furnace, advantages, characteristics and principles of heating furnace

Rapid quenching heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of heat treatment, Forging heating, Casting heating, quench and quench。The following is to introduce the Rapid quenching heating furnace:

1、Brief introduction of Rapid quenching heating furnace

Rapid quenching heating furnaceIt is a forging heating device using gas as fuel.，at the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Strong adaptability,Easy to maintain,energy saving and environmental protection,Strong adaptability,Easy to maintain，is a kind of high quality and low price Rapid quenching heating furnace，favorable price。

Rapid quenching heating furnace

2、Rapid quenching heating furnace function

Rapid quenching heating furnacemultifunctional, with functions such as temper, anneal, normalizing, heat treatment and Casting heating，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，features include energy saving and environmental protection, energy-efficient, Easy to control, Stable and reliable and Easy to maintain。

Rapid quenching heating furnace

3、Rapid quenching heating furnace use

The purpose of Rapid quenching heating furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Rapid quenching heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal tempering

By properly heating and cooling the metal material, the Rapid quenching heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal forging heating

The Rapid quenching heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Energy conservation and environmental protection

The Rapid quenching heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Rapid quenching heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Rapid quenching heating furnace

4、Rapid quenching heating furnace introduction video

On-site aerial photography of Rapid quenching heating furnace。

Rapid quenching heating furnace

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal melting and casting,Metal forging heating,Improve production efficiency,Metal tempering and so on。

5、Rapid quenching heating furnace function

Rapid quenching heating furnaceit has the functions of Forging heating, hardening and tempering, quench, Forging heating and Casting heating，is a popular Rapid quenching heating furnace，It is mostly used in Metal heat treatment, Energy conservation and environmental protection, Metal melting and casting, Metal forging heating, Improve production efficiency, Metal melting and casting and so on，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is an ideal choice for customers to buy Rapid quenching heating furnace。

Rapid quenching heating furnace

6、Rapid quenching heating furnace price concessions

The Rapid quenching heating furnace price is introduced as follows:

1. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Rapid quenching heating furnace price and service can meet the actual needs of customers.

2. regional advantages

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

3. specifications and models

The same product, different specifications and models, the performance of the product is different, therefore, manufacturers need different costs in producing and manufacturing products, so the prices of different specifications and models are different, and customers should give priority to suitability when purchasing.

4. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. Brand strength

At present, there are various brands of Rapid quenching heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Rapid quenching heating furnace are different.

Rapid quenching heating furnace

Rapid quenching heating furnacestructure mainly includes: combustor, furnace chamber, convection chamber, ventilation system, Radiation chamber and so on，is a Rapid quenching heating furnace，multifunctional, with functions such as temper, anneal, heat treatment, normalizing and hardening and tempering。