Introduction to Rapid heating quenching heat treatment furnace and forging furnace working principle

Rapid heating quenching heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is designed by One-combustion energy saving with advanced technology。

1、Brief introduction of Rapid heating quenching heat treatment furnace

Rapid heating quenching heat treatment furnaceIt is a forging heating device using gas as fuel.，the principle is simple.The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，widely used inaerospace,heat treatment,petroleum,material,chemical industry and other industries，is a kind of Rapid heating quenching heat treatment furnace manufactured by One-combustion energy saving。

Rapid heating quenching heat treatment furnace

2、Rapid heating quenching heat treatment furnace function

Rapid heating quenching heat treatment furnacemultifunctional, with functions such as Casting heating, normalizing, heat treatment, anneal and temper，Structure consists of convection chamber, recovery of waste heat, combustor, Radiation chamber, ventilation system and so on，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，is a popular Rapid heating quenching heat treatment furnace，Widely used inMetal forging heating,Improve production efficiency,Metal heat treatment,Metal melting and casting,Metal tempering and so on。

Rapid heating quenching heat treatment furnace

3、Rapid heating quenching heat treatment furnace real beat

Rapid heating quenching heat treatment furnace picture at a glance, showing elegance.。

Rapid heating quenching heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of advantages of Rapid heating quenching heat treatment furnace

Rapid heating quenching heat treatment furnaces have the following advantages.

1. Wide application range

The Rapid heating quenching heat treatment furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Improve product quality

Because the Rapid heating quenching heat treatment furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Efficient combustion

The Rapid heating quenching heat treatment furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Uniform heating

The Rapid heating quenching heat treatment furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Rapid heating quenching heat treatment furnace can significantly reduce energy consumption, thus reducing operating costs.

Rapid heating quenching heat treatment furnace

5、Introduction of Rapid heating quenching heat treatment furnace characteristics

Rapid heating quenching heat treatment furnace has the following characteristics

1. Easy to maintain

The structural design of the Rapid heating quenching heat treatment furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Strong adaptability

The Rapid heating quenching heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Rapid heating quenching heat treatment furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Rapid heating quenching heat treatment furnace

6、How much is the Rapid heating quenching heat treatment furnace?

The Rapid heating quenching heat treatment furnace price is introduced as follows:

1. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

2. Self quality

As we all know, the service life of products with excellent quality will be longer, and at the same time, the benefits created by such products for customers will be higher, which will lead to an increase in the cost of products and a high sales price of products.

3. market supply and demand

Market change is the main factor that affects the price level. Because of the instability and uncertainty of the market, the sales price of Rapid heating quenching heat treatment furnace will fluctuate greatly, and the market changes are various.

4. Product configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

5. Reasonable cost

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

Rapid heating quenching heat treatment furnace

Rapid heating quenching heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Easy to control,Easy to maintain,energy-efficient,Stable and reliable,energy saving and environmental protection。