Introduction to Regenerative natural gas through heating furnace and Forging furnace structure principle

Regenerative natural gas through heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，it is an ideal choice for customers to buy Regenerative natural gas through heating furnace。

1、Brief introduction of Regenerative natural gas through heating furnace

Regenerative natural gas through heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Regenerative natural gas through heating furnace

2、Advantages of Regenerative natural gas through heating furnace principle

Regenerative natural gas through heating furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it can be used in metallurgy, machinery, light industry, automobile, electron and other industries，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of Forging heating, quench, normalizing, temper and Casting heating，has been favored by more and more customers.。

Regenerative natural gas through heating furnace

3、Regenerative natural gas through heating furnace application

Regenerative natural gas through heating furnaces have the following purposes.

1. Improve production efficiency

The Regenerative natural gas through heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Regenerative natural gas through heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative natural gas through heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Regenerative natural gas through heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal heat treatment

In addition to forging heating, Regenerative natural gas through heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Regenerative natural gas through heating furnace

4、Regenerative natural gas through heating furnace function

Regenerative natural gas through heating furnacemultifunctional, with functions such as hardening and tempering, heat treatment, anneal, Forging heating and heat treatment，It has a wide range of uses, including Metal tempering, Metal forging heating, Metal heat treatment, Metal forging heating and Improve production efficiency，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used in shipping, Machinery manufacturing, aerospace, light industry and metallurgy，it is an ideal choice for customers to buy Regenerative natural gas through heating furnace。

Regenerative natural gas through heating furnace

5、Regenerative natural gas through heating furnace performance advantage

Regenerative natural gas through heating furnaces have the following advantages.

1. Uniform heating

The Regenerative natural gas through heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. easy to operate

The operation interface of the Regenerative natural gas through heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Wide application range

The Regenerative natural gas through heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative natural gas through heating furnace can significantly reduce energy consumption, thus reducing operating costs.

5. Efficient combustion

The Regenerative natural gas through heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

Regenerative natural gas through heating furnace

6、How much is the Regenerative natural gas through heating furnace?

The Regenerative natural gas through heating furnace price is introduced as follows:

1. company strength

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative natural gas through heating furnace have more or less differences in price.

4. technology

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

5. Cost input

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Regenerative natural gas through heating furnace will also fluctuate to some extent.

Regenerative natural gas through heating furnace

Regenerative natural gas through heating furnacewidely used inheat treatment,war industry,Household necessities,petroleum,material and other industries，it has the structure of convection chamber, ventilation system, furnace chamber, ventilation system and combustor。