What is a Trolley type industrial furnace? Forging furnace specifications, models, and parameters

Trolley type industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，features include energy-efficient, Easy to maintain, Stable and reliable, energy saving and environmental protection and Easy to control。

1、Brief introduction of Trolley type industrial furnace

Trolley type industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Mainly used forMetal melting and casting,Metal tempering,Improve production efficiency,Metal forging heating andMetal heat treatment，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a common Trolley type industrial furnace。

Trolley type industrial furnace

2、Introduction of Trolley type industrial furnace characteristics

Trolley type industrial furnace has the following characteristics

1. Stable and reliable

The Trolley type industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Trolley type industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Trolley type industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Trolley type industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Efficient heating

The Trolley type industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Trolley type industrial furnace

3、Introduction of advantages of Trolley type industrial furnace

Trolley type industrial furnaces have the following advantages.

1. Wide application range

The Trolley type industrial furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Extend the service life of equipment

The Trolley type industrial furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

3. Intelligent control

The Trolley type industrial furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Uniform heating

The Trolley type industrial furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Rapid temperature rise

The Trolley type industrial furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Trolley type industrial furnace

4、Structural advantages of Trolley type industrial furnace

The Trolley type industrial furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Trolley type industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Trolley type industrial furnace

5、Trolley type industrial furnace HD real shot

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Trolley type industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Trolley type industrial furnace real shot picture

The styles and designs of Trolley type industrial furnace are diverse, and the specifications and models can be tailored according to users' needs, providing high-definition drawings for our customers' reference.。

Trolley type industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

Trolley type industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，at runtime,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。