What is a Multi functional gas trolley furnace? Introduction to the principle of Forging furnace structure

Multi functional gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。The following is to introduce the Multi functional gas trolley furnace:

1、Brief introduction of Multi functional gas trolley furnace

Multi functional gas trolley furnaceIt is a forging heating device using gas as fuel.，has been favored by more and more customers.。

Multi functional gas trolley furnace

2、Multi functional gas trolley furnace characteristics

The Multi functional gas trolley furnace features are as follows:

1. Easy to control

The combustion system and ventilation system of the Multi functional gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Multi functional gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Easy to maintain

The structural design of the Multi functional gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Multi functional gas trolley furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Multi functional gas trolley furnace

3、Multi functional gas trolley furnace structure composition

The Multi functional gas trolley furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Multi functional gas trolley furnace

4、Advantages of Multi functional gas trolley furnace principle

Multi functional gas trolley furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，multifunctional, with functions such as temper, anneal, heat treatment, Casting heating and normalizing，usually used in pharmacy, building materials, light industry, chemical industry, heat treatment and other fields，Mainly used forEnergy conservation and environmental protection,Improve production efficiency,Metal forging heating,Metal melting and casting andMetal heat treatment，Simple structure and advanced technology.，it is mainly composed of recovery of waste heat, convection chamber, furnace chamber, Radiation chamber and ventilation system。

Multi functional gas trolley furnace

5、Multi functional gas trolley furnace use

The purpose of Multi functional gas trolley furnace is introduced as follows:

1. Metal forging heating

The Multi functional gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi functional gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal forging heating

The Multi functional gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Multi functional gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Multi functional gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Multi functional gas trolley furnace

6、company profile

Shandong yiran energy-saving environment protection co., ltd, located in Shandong(Province), is a large Multi functional gas trolley furnace manufacturer. The Multi functional gas trolley furnace produced have good performance, low price, reasonable structure and excellent quality. The key is reasonable price. Welcome new and old customers to visit and buy.。

One-combustion energy saving

Multi functional gas trolley furnacemultifunctional, with functions such as Forging heating, hardening and tempering, Forging heating, quench and normalizing，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.，It is an efficient, energy-saving and environment-friendly metal heating device.。