Introduction to Environmentally friendly walking heating furnace, introduction to heating furnace advantages and characteristics

Environmentally friendly walking heating furnaceIt is a forging heating device using gas as fuel.，the main features are Strong adaptability, Stable and reliable, energy saving and environmental protection, Easy to control and Stable and reliable，Widely used in Metal heat treatment, Metal tempering, Metal melting and casting, Energy conservation and environmental protection and Improve production efficiency，Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，has been favored by more and more customers.。

1、Brief introduction of Environmentally friendly walking heating furnace

Environmentally friendly walking heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it has the functions of anneal, normalizing, Forging heating, quench and quench，is developed and improved by One-combustion energy saving。

Environmentally friendly walking heating furnace

2、Environmentally friendly walking heating furnace explanation video

The following is the live video of Environmentally friendly walking heating furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials. of One-combustion energy savingEnvironmentally friendly walking heating furnace.。

Environmentally friendly walking heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

3、Environmentally friendly walking heating furnace application

Environmentally friendly walking heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Environmentally friendly walking heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly walking heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Environmentally friendly walking heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Environmentally friendly walking heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Environmentally friendly walking heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Environmentally friendly walking heating furnace

4、Introduction of Environmentally friendly walking heating furnace characteristics

Environmentally friendly walking heating furnace has the following characteristics

1. Stable and reliable

The Environmentally friendly walking heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Efficient heating

The Environmentally friendly walking heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Stable and reliable

The Environmentally friendly walking heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Strong adaptability

The Environmentally friendly walking heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Environmentally friendly walking heating furnace

5、How much is the Environmentally friendly walking heating furnace?

The Environmentally friendly walking heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Configuration difference

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. manufacturing cost

The production cost determines the price. The production cost here mainly includes technology, materials, technology, manpower and other related factors, among which the technology content is high, and the cost is relatively high, but the performance will be better; The better the quality of raw materials, the greater the cost and the longer the overall life of the product; If the manufacturer has a rational manufacturing process and strict production management system, and can make full use of human and material resources, then it can reduce the waste of expenses and production costs to a great extent, and the Environmentally friendly walking heating furnace just meets this condition, so as to ensure the high-tech content and high quality of products, it can also enjoy low prices.

4. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

5. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Environmentally friendly walking heating furnace

6、One-combustion energy saving workshop real shot

On-site aerial photography of Environmentally friendly walking heating furnace。

Environmentally friendly walking heating furnace

As you can see from the live video.One-combustion energy saving usually used in pharmacy, electron, shipping, Machinery manufacturing, chemical industry and other fields。

Environmentally friendly walking heating furnacein the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，multifunctional, with functions such as hardening and tempering, heat treatment, Casting heating, anneal and Forging heating。