What is a Regenerative chain annealing furnace? Introduction to the Working Principle of forging furnace

Regenerative chain annealing furnaceIt is a forging heating device using gas as fuel.，the product looks atmospheric.，It has a wide range of uses, and is often used inMetal heat treatment,Metal tempering,Metal melting and casting,Improve production efficiency,Metal forging heating and so on，the main features are energy-efficient, Easy to maintain, energy-efficient, energy saving and environmental protection and Stable and reliable，it is widely used in light industry, pharmacy, building materials, Machinery manufacturing and heat treatment。

1、Brief introduction of Regenerative chain annealing furnace

Regenerative chain annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the structure of combustor, Radiation chamber, recovery of waste heat, ventilation system and furnace chamber，This productThe overall structural design is simple, diverse and beautiful.，at the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Regenerative chain annealing furnace

2、Regenerative chain annealing furnace working site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Regenerative chain annealing furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Regenerative chain annealing furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

3、Structural characteristics of Regenerative chain annealing furnace

The Regenerative chain annealing furnace has the following structure

1. Radiation chamber

The heat load of the main place for Regenerative chain annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Regenerative chain annealing furnace

4、Regenerative chain annealing furnace application

Regenerative chain annealing furnaces have the following purposes.

1. Improve production efficiency

The Regenerative chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal heat treatment

In addition to forging heating, Regenerative chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Regenerative chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative chain annealing furnace

5、Regenerative chain annealing furnace function

Regenerative chain annealing furnacemultifunctional, with functions such as Casting heating, normalizing, heat treatment, Forging heating and hardening and tempering，It is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced Regenerative chain annealing furnace developed by our company in combination with the actual situation of the industry。

Regenerative chain annealing furnace

6、Regenerative chain annealing furnace price advantage

The Regenerative chain annealing furnace price is introduced as follows:

1. quality

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

2. Configuration difference

Usually, the quotation of Regenerative chain annealing furnace changes with its configuration, but the quotation is different according to the different needs of customers and different product configurations.

3. sales mode

One-combustion energy saving Regenerative chain annealing furnace manufacturer is a large professional production center, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Regenerative chain annealing furnace price is also low.

4. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

5. Model size

With different specifications, the basic configuration of products will be different, and the price of products with high configuration will naturally be higher, otherwise the price will be lower, so there is a close relationship between specifications and prices.

Regenerative chain annealing furnace

Regenerative chain annealing furnaceit has been widely used in chemical industry, automobile, war industry, light industry, metallurgy and other industries，is a popular Regenerative chain annealing furnace。