Introduction to Roller bottom continuous heating furnace and forging furnace structure principle

Roller bottom continuous heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks beautiful.，The structural design is simple, novel and special.，structure mainly includes: recovery of waste heat, furnace chamber, ventilation system, convection chamber, furnace chamber and so on。

1、Brief introduction of Roller bottom continuous heating furnace

Roller bottom continuous heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，was developed and designed by One-combustion energy saving。

Roller bottom continuous heating furnace

2、Advantages of Roller bottom continuous heating furnace principle

Roller bottom continuous heating furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it mainly includes recovery of waste heat, combustor, convection chamber, ventilation system and ventilation system，This Roller bottom continuous heating furnaceThe overall structural design is relatively simple。

Roller bottom continuous heating furnace

3、Roller bottom continuous heating furnace application

Roller bottom continuous heating furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Roller bottom continuous heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Roller bottom continuous heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Roller bottom continuous heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Roller bottom continuous heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Roller bottom continuous heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Roller bottom continuous heating furnace

4、Introduction of Roller bottom continuous heating furnace characteristics

Roller bottom continuous heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Roller bottom continuous heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Roller bottom continuous heating furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Roller bottom continuous heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Roller bottom continuous heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Roller bottom continuous heating furnace

5、Roller bottom continuous heating furnace working site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Roller bottom continuous heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

6、How to choose the right product manufacturer?

Choosing a suitable Roller bottom continuous heating furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Roller bottom continuous heating furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Roller bottom continuous heating furnaceStrong adaptability,Stable and reliable,energy saving and environmental protection,energy-efficient,Easy to control，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。