Introduction to Well type annealing heating furnace and heating furnace advantages and features

Well type annealing heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as Forging heating, hardening and tempering, heat treatment, quench and normalizing，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Well type annealing heating furnace

Well type annealing heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

Well type annealing heating furnace

2、Well type annealing heating furnace advantage

The advantages of Well type annealing heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Well type annealing heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. Uniform heating

The Well type annealing heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Rapid temperature rise

The Well type annealing heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. Wide application range

The Well type annealing heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Well type annealing heating furnace

3、Structural characteristics of Well type annealing heating furnace

The Well type annealing heating furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. Radiation chamber

The heat load of the main place for Well type annealing heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Well type annealing heating furnace

4、Introduction of Well type annealing heating furnace characteristics

Well type annealing heating furnace has the following characteristics

1. Easy to maintain

The structural design of the Well type annealing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Well type annealing heating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Well type annealing heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Well type annealing heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Well type annealing heating furnace

5、Well type annealing heating furnace real beat

Well type annealing heating furnace manufacturer, the product High definition shooting. In order to facilitate new and old customers to find satisfactory the product looks beautiful. more quickly, the following high-definition pictures are provided for reference.。

Well type annealing heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

6、Brief introduction of Well type annealing heating furnace

Well type annealing heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is an ideal choice for customers to buy Well type annealing heating furnace。

Well type annealing heating furnace

Well type annealing heating furnacethe main structure includes Radiation chamber, recovery of waste heat, ventilation system, ventilation system and convection chamber，at runtime,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。