What is a Quenching well furnace? Introduction to the advantages and characteristics of heating furnace functions

Quenching well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，be loved by our customers.。The following is to introduce the Quenching well furnace:

1、Brief introduction of Quenching well furnace

Quenching well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

Quenching well furnace

2、Quenching well furnace use

The purpose of Quenching well furnace is introduced as follows:

1. Energy conservation and environmental protection

The Quenching well furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Quenching well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Quenching well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Quenching well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Quenching well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Quenching well furnace

3、Quenching well furnace principle

Quenching well furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，It has the functions of Improve production efficiency, Energy conservation and environmental protection, Metal melting and casting, Improve production efficiency and Energy conservation and environmental protection。

Quenching well furnace

4、Introduction of advantages of Quenching well furnace

The advantages of Quenching well furnace are as follows:

1. Intelligent control

The Quenching well furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Wide application range

The Quenching well furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Multiple fuel options

Although the Quenching well furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Extend the service life of equipment

The Quenching well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Extend the service life of equipment

The Quenching well furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Quenching well furnace

5、Quenching well furnace explanation video

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Quenching well furnace production process and production site, and gain favorable comments and recognition from customers.。

Quenching well furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

6、company strength

The company has many years of Quenching well furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Quenching well furnaceit has been widely used in shipping, petroleum, automobile, Machinery manufacturing, aerospace and other industries，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Quenching well furnace。