Introduction to Catalytic reduction flue gas denitrification system, SCR denitration specifications, model parameters

Catalytic reduction flue gas denitrification systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，it is widely used in metallurgy, iron and steel plant, coal-fired power station, cement plant, Gas power plant and other industries，Technology has been developed and applied for many years, and it is mature and stable. The Catalytic reduction flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalytic reduction flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic reduction flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、Technology has been developed and applied for many years, and it is mature and stable. The Catalytic reduction flue gas denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalytic reduction flue gas denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalytic reduction flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalytic reduction flue gas denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.，multifunctional, with functions such as Promote sustainable development, Improve working conditions, environmental protection, Improve working conditions and environmental protection，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Catalytic reduction flue gas denitrification system:

1、Brief introduction of Catalytic reduction flue gas denitrification system

Catalytic reduction flue gas denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，it has the characteristics of Environment friendly, Environmental protection and pollution-free, High denitration efficiency, Stable operation and Environment friendly，the product looks beautiful.，at runtime,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，the product looks atmospheric.。

Catalytic reduction flue gas denitrification system

2、Catalytic reduction flue gas denitrification system introduction video

You can buy Catalytic reduction flue gas denitrification system according to your needs and show you product videos.。

Catalytic reduction flue gas denitrification system

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the product looks atmospheric.。

3、Catalytic reduction flue gas denitrification system work site real shot

A high-definition picture list of Catalytic reduction flue gas denitrification system is available for our customers to visit. The physical visit can be made to the factory. The address of the visit is Jinan, and the time can be reserved in advance. The manufacturer has a special person to receive it.。

Catalytic reduction flue gas denitrification system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Introduction of Catalytic reduction flue gas denitrification system characteristics

Catalytic reduction flue gas denitrification system has the following characteristics

1. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

2. Environmental protection

The final products of Catalytic reduction flue gas denitrification system technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

3. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

4. Mature technology

After years of development and application, Catalytic reduction flue gas denitrification system technology is very mature and has a wide application prospect.

5. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

Catalytic reduction flue gas denitrification system

5、How much is the Catalytic reduction flue gas denitrification system?

The Catalytic reduction flue gas denitrification system price is introduced as follows:

1. Manufacturer's strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Catalytic reduction flue gas denitrification system. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Catalytic reduction flue gas denitrification system will be different.

2. Configuration level

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. Brand strength

At present, there are various brands of Catalytic reduction flue gas denitrification system in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Catalytic reduction flue gas denitrification system are different.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.

5. manufacturing cost

Cost is a direct and fundamental factor that affects the price of Catalytic reduction flue gas denitrification system. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Catalytic reduction flue gas denitrification system price, low in cost and low in price.

Catalytic reduction flue gas denitrification system

6、One-combustion energy saving's strength

The company has many years of Catalytic reduction flue gas denitrification system manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Catalytic reduction flue gas denitrification systemis a kind of high quality and low price Catalytic reduction flue gas denitrification system，the principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，Environmental protection and pollution-free,Mature and stable technology,energy saving and environmental protection,Efficient denitration,Promote sustainable development。