Introduction to Low temperature catalyst furnace external flue gas denitrification equipment, SCR flue gas denitrification advantages, characteristics and principles

Low temperature catalyst furnace external flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.。The following is to introduce the Low temperature catalyst furnace external flue gas denitrification equipment:

1、Brief introduction of Low temperature catalyst furnace external flue gas denitrification equipment

Low temperature catalyst furnace external flue gas denitrification equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst furnace external flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst furnace external flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst furnace external flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst furnace external flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst furnace external flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalyst furnace external flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，at work,Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，widely used in metallurgy, iron and steel plant, Gas power plant, coal-fired power station, cement plant and other fields，low in price，modern technology。

Low temperature catalyst furnace external flue gas denitrification equipment

2、Low temperature catalyst furnace external flue gas denitrification equipment function

Low temperature catalyst furnace external flue gas denitrification equipmentit has the functions of Improve working conditions, Improve energy efficiency, Improve energy efficiency, Promote sustainable development and Improve working conditions。

Low temperature catalyst furnace external flue gas denitrification equipment

3、Low temperature catalyst furnace external flue gas denitrification equipment video

On-site aerial photography of Low temperature catalyst furnace external flue gas denitrification equipment。

Low temperature catalyst furnace external flue gas denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the characteristics of Environmental protection and pollution-free, Good selectivity, Efficient denitration, Strong adaptability and Promote sustainable development。

4、Low temperature catalyst furnace external flue gas denitrification equipment characteristics

The Low temperature catalyst furnace external flue gas denitrification equipment features are as follows:

1. Stable operation and stability

The Low temperature catalyst furnace external flue gas denitrification equipment technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

2. Small secondary pollution

The by-products produced in the Low temperature catalyst furnace external flue gas denitrification equipment opening process are nitrogen and water vapor, and there is no secondary pollution problem.

3. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

4. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

5. Strong adaptability

Low temperature catalyst furnace external flue gas denitrification equipment technology can meet the needs of flue gas denitrification under different working conditions and has a wide range of applications.

Low temperature catalyst furnace external flue gas denitrification equipment

5、How much is the Low temperature catalyst furnace external flue gas denitrification equipment?

The Low temperature catalyst furnace external flue gas denitrification equipment price is introduced as follows:

1. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. sales mode

Direct-selling manufacturers are cheaper than second-and third-tier dealers because the former earns the difference without going through middlemen; Online sales are cheaper than offline sales, because you need to invest in store fees, employee fees and other related expenses in the later stage; Close-distance sales are cheaper than long-distance sales because the latter consumes a lot of transportation costs.

3. specifications and models

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Low temperature catalyst furnace external flue gas denitrification equipment prices.

4. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Low temperature catalyst furnace external flue gas denitrification equipment price and service can meet the actual needs of customers.

Low temperature catalyst furnace external flue gas denitrification equipment

6、One-combustion energy saving company service

One-combustion energy saving adheres to the service concept of "being honest, doing things according to rules, pioneering and innovating, mutual benefit and win-win", and serves every customer wholeheartedly to create quality products and intimate services for customers.。

One-combustion energy saving

Low temperature catalyst furnace external flue gas denitrification equipmentthe advantage is The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst furnace external flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst furnace external flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst furnace external flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalyst furnace external flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst furnace external flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.，widely used inbuilding materials,coal-fired power station,Gas power plant,metallurgy,cement plant and other industries，the product looks beautiful.。