Introduction and advantages of Chain annealing furnace

Chain annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Chain annealing furnace:

1、Brief introduction of Chain annealing furnace

Chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，multifunctional, with functions such as quench, temper, heat treatment, anneal and Casting heating，the main features are Easy to control, Easy to maintain, Stable and reliable, Strong adaptability and Easy to control，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，has been favored by more and more customers.。

Chain annealing furnace

2、Chain annealing furnace application

Chain annealing furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal heat treatment

In addition to forging heating, Chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Improve production efficiency

The Chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Energy conservation and environmental protection

The Chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Chain annealing furnace

3、Functional advantages of Chain annealing furnace

Chain annealing furnaces have the following advantages.

1. Uniform heating

The Chain annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Multiple fuel options

Although the Chain annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

3. easy to operate

The operation interface of the Chain annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Improve product quality

Because the Chain annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

Chain annealing furnace

4、Chain annealing furnace principle

Chain annealing furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

Chain annealing furnace

5、Chain annealing furnace quotation

The Chain annealing furnace price is introduced as follows:

1. Company size

There are many Chain annealing furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

2. Manufacturer's sales model

Each manufacturer's sales model is different, and the preferential degree of products is also different. Some manufacturers adopt the mode of "thin profit and quick turnover", and the price is relatively cheap. Some manufacturers sell their products at high prices to earn high profits. When purchasing products, they must compare the prices to avoid being cheated.

3. select a qualified person

The raw materials used by different manufacturers will also be different. The better the raw materials, the better the quality and performance of the products and the higher the price. On the contrary, the products made of ordinary materials have low production costs and much lower prices.

4. Model specification

Customer needs are different, so the required product models will be different. Different product models and different performances will naturally lead to different Chain annealing furnace prices.

5. company strength

At present, there are many manufacturers of products on the market, some of which belong to direct selling manufacturers and some belong to middlemen. Direct selling manufacturers will cost less than middlemen, so the quotation for products will be lower. Therefore, it is recommended that customers buy products from direct selling manufacturers of Chain annealing furnace. In addition, even direct selling manufacturers have different capital status, strength level and technology, and the quotation for Chain annealing furnace will be different.

Chain annealing furnace

6、One-combustion energy saving after-sales service

Our company can provide you with all-round, high-quality and professional services, especially in after-sales service, which has been unanimously recognized and favored by our customers.。

One-combustion energy saving

Chain annealing furnaceit has the functions of Forging heating, hardening and tempering, quench, Forging heating and Casting heating，the product looks atmospheric.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。