What is a End in side out heating furnace? Introduction to the principle of heating furnace structure

End in side out heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.。The following is to introduce the End in side out heating furnace:

1、Brief introduction of End in side out heating furnace

End in side out heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，it is mainly composed of Radiation chamber, ventilation system, furnace chamber, recovery of waste heat and combustor，support customization。

End in side out heating furnace

2、End in side out heating furnace function

End in side out heating furnaceit has the functions of anneal, heat treatment, temper, Forging heating and hardening and tempering，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is carefully developed by One-combustion energy saving combined with advanced technology。

End in side out heating furnace

3、End in side out heating furnace advantage

The advantages of End in side out heating furnace are as follows:

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the End in side out heating furnace can significantly reduce energy consumption, thus reducing operating costs.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the End in side out heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Improve product quality

Because the End in side out heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. Rapid temperature rise

The End in side out heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

End in side out heating furnace

4、End in side out heating furnace customer scene picture

The following pictures can be used for reference by new and old customers.。

End in side out heating furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、End in side out heating furnace principle

End in side out heating furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the functions of Casting heating, normalizing, Forging heating, quench and Casting heating，The overall structural design is relatively simple and compact.，it has the structure of recovery of waste heat, ventilation system, Radiation chamber, ventilation system and furnace chamber，features include Stable and reliable, energy saving and environmental protection, Easy to control, Easy to maintain and Strong adaptability，is a End in side out heating furnace newly developed by One-combustion energy saving。

End in side out heating furnace

6、How much is the End in side out heating furnace?

The End in side out heating furnace price is introduced as follows:

1. Company size

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

2. Brand strength

Different brands of products in the same series have more or less differences in product prices, and different brands of End in side out heating furnace have more or less differences in price.

3. market competition

When there are many customers who need this product in the market, and the supply quantity of the manufacturer is limited, there is not so much inventory at all. At this time, the demand will be in short supply, and the price of the End in side out heating furnace will be very high.

4. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

5. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving End in side out heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the End in side out heating furnace price can meet the purchasing needs of customers.

End in side out heating furnace

End in side out heating furnacethe main structure includes convection chamber, ventilation system, furnace chamber, convection chamber, combustor and so on，This productSimple structure and advanced technology.，is a popular End in side out heating furnace。