Introduction to Continuous quenching industrial furnace and Forging furnace structure principle

Continuous quenching industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Continuous quenching industrial furnace

Continuous quenching industrial furnaceIt is a forging heating device using gas as fuel.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has the functions of heat treatment, quench, Forging heating, anneal and temper，It has a wide range of uses, including Metal forging heating, Metal heat treatment, Metal tempering, Energy conservation and environmental protection and Metal melting and casting，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。

Continuous quenching industrial furnace

2、Introduction of Continuous quenching industrial furnace characteristics

Continuous quenching industrial furnace has the following characteristics

1. Strong adaptability

The Continuous quenching industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Continuous quenching industrial furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to maintain

The structural design of the Continuous quenching industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Easy to control

The combustion system and ventilation system of the Continuous quenching industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Continuous quenching industrial furnace

3、Continuous quenching industrial furnace field real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Continuous quenching industrial furnace production process and production site, and gain favorable comments and recognition from customers.。

Continuous quenching industrial furnace

As you can see from the live video.，One-combustion energy saving is a popular Continuous quenching industrial furnace。

4、Continuous quenching industrial furnace function

Continuous quenching industrial furnacemultifunctional, with functions such as Casting heating, normalizing, hardening and tempering, quench and Forging heating，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，has been favored by more and more customers.。

Continuous quenching industrial furnace

5、Continuous quenching industrial furnace price

The Continuous quenching industrial furnace price is introduced as follows:

1. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Continuous quenching industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Continuous quenching industrial furnace price can meet the purchasing needs of customers.

2. model

Because of different models, the basic configuration of the product is different, so its cost input will be different. The higher the cost input, the higher the market sales price. Generally speaking, the large-scale Continuous quenching industrial furnace has excellent performance, so it also makes the sales price high.

3. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Continuous quenching industrial furnace price is affected by the configuration, and the price varies.

4. Quality advantages and disadvantages

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

5. Low cost of raw materials

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Continuous quenching industrial furnace will also fluctuate to some extent.

Continuous quenching industrial furnace

6、One-combustion energy saving delivery site

The following is the live video of Continuous quenching industrial furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency. of Continuous quenching industrial furnace.。

Continuous quenching industrial furnace

As you can see from the live video.One-combustion energy saving features include Stable and reliable, Easy to maintain, Stable and reliable, energy saving and environmental protection and energy-efficient。

Continuous quenching industrial furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is mainly composed of Radiation chamber, recovery of waste heat, combustor, ventilation system and furnace chamber，Continuous quenching industrial furnaceThe structure is novel, special, advanced, reasonable and scientific.。