Introduction to Plate chain heat treatment furnace, Forging furnace specifications, model parameters

Plate chain heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，it has the functions of hardening and tempering, quench, Forging heating, hardening and tempering and Forging heating，super quality and competitive price。

1、Brief introduction of Plate chain heat treatment furnace

Plate chain heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has been widely used in material, Machinery manufacturing, surface treatment, aerospace, pharmacy and other industries，is a common Plate chain heat treatment furnace，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it is an ideal choice for customers to buy Plate chain heat treatment furnace。

Plate chain heat treatment furnace

2、Plate chain heat treatment furnace structure

The Plate chain heat treatment furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. furnace chamber

A space for holding metallic materials for heating.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Radiation chamber

The heat load of the main place for Plate chain heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Plate chain heat treatment furnace

3、Plate chain heat treatment furnace working site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Plate chain heat treatment furnacet operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Plate chain heat treatment furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

4、Plate chain heat treatment furnace field real shot

One-combustion energy saving Plate chain heat treatment furnace manufacturers, a variety of series of Plate chain heat treatment furnace with high-definition pictures at a glance, showing the product style, for the majority of users to choose at will.。

Plate chain heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、How much is the Plate chain heat treatment furnace?

The Plate chain heat treatment furnace price is introduced as follows:

1. Product technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. manufacturing cost

The manufacturer has a fixed raw material supplier, so that the raw material price given by the raw material supplier to the manufacturer will be lower, the raw material cost invested by the manufacturer will be reduced, and the price of the Plate chain heat treatment furnace will also be reduced.

3. Product configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Plate chain heat treatment furnace has a higher cost performance.

4. specifications and models

One-combustion energy saving Plate chain heat treatment furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving Regularly launch various preferential activities

5. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Plate chain heat treatment furnace price and service can meet the actual needs of customers.

Plate chain heat treatment furnace

6、One-combustion energy saving company service

On the premise of ensuring high quality and low price, One-combustion energy saving can also provide customers with high-standard services, help customers choose appropriate specifications and models, and install and debug products on site for them free of charge. If customers have special requirements, our company can also train product operators in operation knowledge. Besides, if everyone's products fail at any time, our company will rush to the scene to solve them in a short time and deal with them in time.。

One-combustion energy saving

Plate chain heat treatment furnaceis a kind of high quality and low price Plate chain heat treatment furnace，multifunctional, with functions such as anneal, heat treatment, quench, Casting heating and temper。