What is a High temperature heat treatment chain furnace? How much is the price of the forging furnace?

High temperature heat treatment chain furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Widely used inMetal melting and casting,Energy conservation and environmental protection,Metal heat treatment,Metal forging heating,Metal melting and casting and so on，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，Easy to control,energy saving and environmental protection,Stable and reliable,energy-efficient,energy saving and environmental protection，in the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of High temperature heat treatment chain furnace

High temperature heat treatment chain furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，Cheap and high quality。

High temperature heat treatment chain furnace

2、High temperature heat treatment chain furnace function

High temperature heat treatment chain furnaceit has the functions of anneal, Casting heating, hardening and tempering, heat treatment and quench，is a common High temperature heat treatment chain furnace，usually used in Household necessities, automobile, material, building materials, electron and other fields，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，is a popular High temperature heat treatment chain furnace。

High temperature heat treatment chain furnace

3、Introduction of advantages of High temperature heat treatment chain furnace

The advantages of High temperature heat treatment chain furnace are as follows:

1. Rapid temperature rise

The High temperature heat treatment chain furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. Uniform heating

The High temperature heat treatment chain furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Multiple fuel options

Although the High temperature heat treatment chain furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Extend the service life of equipment

The High temperature heat treatment chain furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the High temperature heat treatment chain furnace can significantly reduce energy consumption, thus reducing operating costs.

High temperature heat treatment chain furnace

4、Advantages of High temperature heat treatment chain furnace principle

High temperature heat treatment chain furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Mainly used forMetal heat treatment,Improve production efficiency,Metal melting and casting,Metal melting and casting andImprove production efficiency。

High temperature heat treatment chain furnace

5、Introduction of High temperature heat treatment chain furnace characteristics

High temperature heat treatment chain furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some High temperature heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to control

The combustion system and ventilation system of the High temperature heat treatment chain furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some High temperature heat treatment chain furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Efficient heating

The High temperature heat treatment chain furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The High temperature heat treatment chain furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

High temperature heat treatment chain furnace

6、High temperature heat treatment chain furnace price

The High temperature heat treatment chain furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. regional advantages

The price of High temperature heat treatment chain furnace in Jinan, Shandong province is much lower than that in other regions, and One-combustion energy saving is a large High temperature heat treatment chain furnace manufacturer not only pays attention to the quality of products, but also pays more attention to customer satisfaction, and always adopts the marketing strategy of small profits but quick turnover to make the High temperature heat treatment chain furnace price positioning more reasonable, low-cost and economical.

3. Manufacturer's strength

There are many High temperature heat treatment chain furnace manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

4. Product configuration difference

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

5. service

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the High temperature heat treatment chain furnace price and service can meet the actual needs of customers.

High temperature heat treatment chain furnace

High temperature heat treatment chain furnaceIt has a wide range of uses, and is often used inMetal tempering,Improve production efficiency,Energy conservation and environmental protection,Metal tempering,Metal forging heating and so on，the main structure includes combustor, ventilation system, recovery of waste heat, combustor, convection chamber and so on。