Introduction to Pit type copper wire annealing furnace and forging furnace working principle

Pit type copper wire annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。The following is to introduce the Pit type copper wire annealing furnace:

1、Brief introduction of Pit type copper wire annealing furnace

Pit type copper wire annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，multifunctional, with functions such as Casting heating, hardening and tempering, heat treatment, temper and quench，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.。

Pit type copper wire annealing furnace

2、Pit type copper wire annealing furnace application

Pit type copper wire annealing furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Pit type copper wire annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal forging heating

The Pit type copper wire annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Pit type copper wire annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal forging heating

The Pit type copper wire annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Pit type copper wire annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Pit type copper wire annealing furnace

3、Introduction of advantages of Pit type copper wire annealing furnace

Pit type copper wire annealing furnaces have the following advantages.

1. Reduce operating costs

The efficient combustion and waste heat recovery system of the Pit type copper wire annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

2. easy to operate

The operation interface of the Pit type copper wire annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Rapid temperature rise

The Pit type copper wire annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Intelligent control

The Pit type copper wire annealing furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Pit type copper wire annealing furnace

4、Introduction of Pit type copper wire annealing furnace characteristics

Pit type copper wire annealing furnace has the following characteristics

1. Easy to maintain

The structural design of the Pit type copper wire annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Pit type copper wire annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Strong adaptability

The Pit type copper wire annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Pit type copper wire annealing furnace

5、Working principle of Pit type copper wire annealing furnace

Pit type copper wire annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，energy saving and environmental protection,Stable and reliable,Strong adaptability,energy-efficient,Easy to maintain，is carefully developed by One-combustion energy saving combined with advanced technology。

Pit type copper wire annealing furnace

Pit type copper wire annealing furnacemultifunctional, with functions such as hardening and tempering, heat treatment, Casting heating, anneal and normalizing，It is a forging heating device using gas as fuel.。