What is a Catalyst based denitrification? Introduction to the Working Principle of SCR denitration

Catalyst based denitrificationdelective catalytic reduction technology is an efficient flue gas denitrification technology.。The following is to introduce the Catalyst based denitrification:

1、Brief introduction of Catalyst based denitrification

Catalyst based denitrificationis an efficient, stable and environment-friendly flue gas denitrification technology.，is a Catalyst based denitrification，features include Less secondary pollution, Environmental protection and pollution-free, energy saving and environmental protection, Strong adaptability and Strong adaptability，the principle is simple.Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，is an advanced Catalyst based denitrification developed by our company in combination with the actual situation of the industry。

Catalyst based denitrification

2、Catalyst based denitrification real shot picture

One-combustion energy saving Catalyst based denitrification, product manufacturer, product features, is the ideal choice for new and old customers.。

Catalyst based denitrification

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Catalyst based denitrification performance advantage

The advantages of Catalyst based denitrification are as follows:

1. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Catalyst based denitrification technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

2. Mature and stable technology

Catalyst based denitrification technology has been developed and applied for many years, and the technology is mature and stable. The Catalyst based denitrification has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Catalyst based denitrification technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

3. Wide applicability

Catalyst based denitrification technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Catalyst based denitrification technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

4. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalyst based denitrification technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalyst based denitrification technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

5. Environmental friendliness

The by-products produced by Catalyst based denitrification technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalyst based denitrification technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

Catalyst based denitrification

4、Catalyst based denitrification characteristics

The Catalyst based denitrification features are as follows:

1. Mature technology

After years of development and application, Catalyst based denitrification technology is very mature and has a wide application prospect.

2. Stable operation and stability

The technology runs stably and reliably, and is suitable for various scenarios with large changes in flue gas flow, composition and concentration.

3. High denitration efficiency

The denitration efficiency of Catalyst based denitrification technology can reach more than 90%, and it is a widely used post-combustion denitration technology at present.

4. selectivity

Under the action of catalyst, the reducing agent mainly reacts with NOx selectively, but less with other components (such as oxygen) in flue gas, thus reducing unnecessary consumption.

5. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

Catalyst based denitrification

5、Catalyst based denitrification field real shot

Speak directly with facts on the spot。

Catalyst based denitrification

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

6、Catalyst based denitrification quotation

The Catalyst based denitrification price is introduced as follows:

1. Reasonable cost

Production costs include raw material costs, labor costs, other costs, etc., which manufacturers need to invest when producing products, but these factors are not certain. They are affected by the market. When one factor in the market changes, the production costs of manufacturers will also change, and the price of Catalyst based denitrification will also fluctuate to some extent.

2. product model

Because of the different specifications of products, its price will be different, so its selling price is closely related to the model specifications, but the overall selling price of One-combustion energy saving is reasonable among similar products.

3. Product configuration difference

Products of the same style, different configurations, the product price is definitely different, therefore, the Catalyst based denitrification price is affected by the configuration, and the price varies.

4. geographical position

One-combustion energy saving the address is located at:Jinan, Shandong province, the transportation here is developed and convenient, and the products can be transported to the designated place in a short time, which saves customers a sum of transportation expenses.

5. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Catalyst based denitrification manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Catalyst based denitrification price can meet the purchasing needs of customers.

Catalyst based denitrification

Catalyst based denitrificationin the course of work,Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，usually used in metallurgy, building materials, cement plant, metallurgy, iron and steel plant and other fields，the main features are Stable operation, High denitration efficiency, Promote sustainable development, Environment friendly and Mature and stable technology。