Brief introduction of Automatic temperature control chain heating furnace

Automatic temperature control chain heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Mainly used forImprove production efficiency,Metal melting and casting,Metal heat treatment,Energy conservation and environmental protection andImprove production efficiency，Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，is a popular Automatic temperature control chain heating furnace，it is an ideal choice for customers to buy Automatic temperature control chain heating furnace。

1、Brief introduction of Automatic temperature control chain heating furnace

Automatic temperature control chain heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the principle is simple.The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。

Automatic temperature control chain heating furnace

2、Automatic temperature control chain heating furnace function

Automatic temperature control chain heating furnacemultifunctional, with functions such as normalizing, quench, temper, normalizing and temper，can be customized according to user's needs.。

Automatic temperature control chain heating furnace

3、Functional advantages of Automatic temperature control chain heating furnace

Automatic temperature control chain heating furnaces have the following advantages.

1. Multiple fuel options

Although the Automatic temperature control chain heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Efficient combustion

The Automatic temperature control chain heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Improve product quality

Because the Automatic temperature control chain heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Intelligent control

The Automatic temperature control chain heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

5. Reduce operating costs

The efficient combustion and waste heat recovery system of the Automatic temperature control chain heating furnace can significantly reduce energy consumption, thus reducing operating costs.

Automatic temperature control chain heating furnace

4、Automatic temperature control chain heating furnace application

Automatic temperature control chain heating furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature control chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal heat treatment

In addition to forging heating, Automatic temperature control chain heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature control chain heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Improve production efficiency

The Automatic temperature control chain heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The Automatic temperature control chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Automatic temperature control chain heating furnace

5、Advantages of Automatic temperature control chain heating furnace principle

Automatic temperature control chain heating furnacein the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the product looks atmospheric.，it has the functions of quench, heat treatment, Casting heating, Forging heating and quench，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，be loved by our customers.。

Automatic temperature control chain heating furnace

6、One-combustion energy saving after-sales service

Our company will not only provide customers with excellent quality Automatic temperature control chain heating furnace, but also choose a series of high-quality services such as appropriate specifications and models according to their actual needs.。

One-combustion energy saving

Automatic temperature control chain heating furnacemultifunctional, with functions such as Casting heating, hardening and tempering, anneal, Forging heating and heat treatment，Widely used inMetal tempering,Metal melting and casting,Metal forging heating,Metal heat treatment,Improve production efficiency and so on。