Introduction to Double car mold roasting furnace and heating furnace structure principle

Double car mold roasting furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is developed and improved by One-combustion energy saving。The following is to introduce the Double car mold roasting furnace:

1、Brief introduction of Double car mold roasting furnace

Double car mold roasting furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，The structural design is more advanced and reasonable.，it is mainly composed of convection chamber, combustor, ventilation system, ventilation system and recovery of waste heat，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，customizable。

Double car mold roasting furnace

2、Double car mold roasting furnace video detail

On-site aerial photography of Double car mold roasting furnace。

Double car mold roasting furnace

As you can see from the live video.，One-combustion energy saving is a common Double car mold roasting furnace。

3、Structural advantages of Double car mold roasting furnace

The Double car mold roasting furnace has the following structure

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. furnace chamber

A space for holding metallic materials for heating.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Double car mold roasting furnace

4、Double car mold roasting furnace function

Double car mold roasting furnacemultifunctional, with functions such as Casting heating, hardening and tempering, anneal, heat treatment and normalizing，be loved by our customers.。

Double car mold roasting furnace

5、Working principle of Double car mold roasting furnace

Double car mold roasting furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the main features are energy-efficient, Stable and reliable, Strong adaptability, energy-efficient and Easy to control，it mainly includes furnace chamber, convection chamber, Radiation chamber, combustor and recovery of waste heat，is a kind of Double car mold roasting furnace manufactured by One-combustion energy saving。

Double car mold roasting furnace

6、Double car mold roasting furnace price

The Double car mold roasting furnace price is introduced as follows:

1. product costs

Cost plays a decisive role in the price. The cost mainly includes the initial investment of the product, such as time, manpower and materials selected. The more the investment cost, the higher the relative product pricing. On the contrary, the less the input cost, the lower the price.

2. quality factor

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Double car mold roasting furnace.

3. Parameter size

Products generally have a variety of specifications and models to meet the multiple needs of manufacturing. The same is true for Double car mold roasting furnace, which have different models and different performances. Therefore, these are all factors that affect the price change of Double car mold roasting furnace.

4. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

5. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Double car mold roasting furnace have more or less differences in price.

Double car mold roasting furnace

Double car mold roasting furnacethe product looks atmospheric.，it has the functions of Forging heating, quench, temper, Casting heating and normalizing，it has the characteristics of Strong adaptability, Easy to maintain, Easy to maintain, Easy to control and energy saving and environmental protection。